Radionics Interface Setup

(a) Using the “Windows Explorer”, go into the directory “radionics 2”
(b) Click setup.exe and follow the instructions
(c) Move the “Images” directory into the Directory “my documents”
(d) The program is ready to be used.  Launch the program using the “Start” button on the task bar, then click “radionics”

Folders:

(1) The “OrgTransf” directory contains transfer diagrams to your orgone generator.  These diagrams are unique, i.e., only you possess these diagrams.
Into the same directory you may install your own transfer diagrams.  Design any diagram that you like, save it in .jpg or .gif format (the two formats supported by this program), and print a copy to put onto your orgone generator.
(2) The “People” directory is set aside for pictures of target persons.  Again, these pictures should be in .jpg or .gif format.  You may get these pictures by scanning photos and putting them into .jpg format or with a digital camera.
(3) The “Action” directory is set aside for diagrams representing the Basic Action.  Into the Basic Action field you can put any image that represents the category of work that you are doing.  For most operations, I am using the “Universal Pentacle” (pentuni.jpg) which amplifies any energy used in the trend and environmental trend fields.  Of course you may also use any other diagram, sigil, or symbol that you consider best representing the overall action of your operation, perhaps some “spirit” or energy field, that presides over the action.
A subdirectory of “Action” is “Planets” which contains the “seven” planetary energies.  If you are familiar with the characteristics of each of the planets, you can use their “magical squares” for the Basic Action: Venus for love, Mercury for communications and business transactions, Jupiter for growth and expansion, etc.
(4) All other directories contain sets of symbols with specific purposes of each.  Use those which you like and which best reflect the intent.
(5) You have the option of several programs and several sets of symbols.  Some of them may not suit your belief structure or may even be offensive to you.  Do not use them!  I intended to be as comprehensive as I could when choosing programs and symbols, offering something for everybody and for every back ground and belief structure.  If you don’t like something, don’t use it!  Better yet, erase it!  I am positive that you find at least two programs that fit your taste and intentions.

The Program

Each program is set up like a multiple radionics device with orgone generator and several specific settings.  The pentagram shape adds to the dynamic nature of the program.  Other shapes such as the tree of life reflect specific mappings, divinatory methods, or belief structures.  You start the program broadcast after having set all images, text boxes, and radionic rates.

Image Boxes

Click on the square box and select a file representing the subject-matter of the box:
(1) Orgone Transfer: Pick a symbol from the OrgTransf directory.  Put the identical directory onto your orgone generator.  Each program has one plastic diagram included that you put on the beamer plate of your Welz Chi Generator or in front of the output pipe of your Orgone Boosted Radionics Device.  You find the identical diagram in the “orgtransf” directory.  Of course you can make your own symbol: a .jpg file in the directory and a “hard copy” in front of the Welz Chi Generator.
(2) Basic Action: Select a diagram that represents the category of action taken.  A neutral design is the universal pentacle.  Planetary squares describe the general category of action.
(3) Main Trend: Select a diagram representing the main trend that you are sending, e.g., a symbol from the “Alphabet of Desire” directory (Aodnew).
(4) Trend Environment: Select a diagram that sets the “atmosphere” in the environment of the target:  a loving atmosphere (Venus), an enterprising atmosphere, a supportive environment, etc.
(5) Main Target: Select a picture of the target person, signature, or the like.  If you have none of that, leave the box empty, but write the person’s name into the text-field below and set the rate by pushing the “main target” button.
(6) Alternate Target: Set another target to prevent repercussion back to you.  You may also use the file “images\keysolnew\mars\againstrepercus.jpg” or similar designs to block any repercussion.
Notes:
(a)  The program works perfectly well if you just use the “Main Target” and “Main trend” boxes and, if you use a Welz Chi Generator, also the orgone transfer box.
(b)  You may just use the text boxes and rate boxes without any pictures of persons in the target or sigils for trends.

Text Boxes

Use the text boxes to write specifics concerning your operation.  For instance, if you use “charisma” on “main trend”, you may add into the text box: “charisma in religious meetings”.  This will put the main focus of all charismatic action toward one’s duties as a preacher.  In this case, the trend environment can be something to make the congregation more receptive.  In these situations the trend will be especially strong!

Rate Boxes: The three small boxes on top or on the side of each image.  Focusing on the image, text box, and what it means, click on the button below the image.  You will get three numbers between 00 and 99.
You may also establish the rates with an external stick pad, click on each rate box and write the number into the popup window.
 

To use the program as an interface with a RAD 2400 DL or RAD 2400 HDS

Establish the rates for trend and target on your RAD 2400, then enter them onto the program.
In this case, you can use the program to refine the radionics operation.
Put the orgone transfer diagram onto the stick pad or well of the RAD 2400 or put it in front of the output pipe.

Conversely, to use the program as an electronic stick pad of your RAD 2400 or RAD 2400 HDS

(1) Connect with the RAD 2400 using the orgone transfer diagram.
(2) Describe trend and target on the RAD 2400 in the appropriate text boxes, perhaps use identical images
(3) While focusing on trend or target, set the rates by pushing the rate buttons below the images.
(4) Set the rates thus obtained on your RAD 2400.

When everything is set, you can start the program

Click the “start” button.  Run the program for a few hours.   It can run in the background of your computer while you work on something else.  When you want to end the operation, click the “stop” button.

Other:

(1) The “print” button allows you to print a copy of your operation, for your records (if you wish so.  Personally I prefer not to keep records)

(2) The “copyright” button tells about the copyrights.  Passwords and similar games that you find with most commercial programs are not needed.  The built-in anti-theft radionics settings will do a much better job and get the perpetrators, pirates, or thieves!

(3) Other programs on the CD are foe specialists in the respective fields (tree of life, Keltic tarot layout, etc.)

Back to NCP

To Magick, Orgone, Radionics